STEP 1: UNPACK
THE BOX
The following
items come packed in the box:
•
VCR
•
Remote control
•
RF coaxial cable
STEP 2: INSTALL
BA'I-FERIES IN THE
REMOTE
CONTROL
Follow these steps whenever you need to install or change the
batteries
in your VCR remote.
1.
Remove the cover of the battery
compartment.
2.
Place batteries
in the remote, matching
the + and - ends of
each battery
to the diagram
inside the compartment.
3.
Replace the cover.
STEP 3: CONNECT
YOUR VCR
If you connect your VCR to your home antenna or cable system
and then to your TV, use the VCR's IN FROM ANT and OUT TO TV
jacks for a good signal as shown.
If you have a TV with AUDIO/VIDEO jacks, use the jacks for a
better connection.
Refer to the Connections section, toward the
back of the manual.
VCR
TV
CABLE, CABLE BOX. OR_ANTENNA
4