Table of Contents
Advertisement
Chapter
t:
G÷ in
9 Sta ed
/F
",\
The Channel
Marker
shown
is just an
example
of what
your
screen may look like.
Dipole
Antenna
Connection
When connecting the antenna to }_mr TV, use the supplied antenna. Follow the steps below to connect the
antenna supplied with your TV (only if you do not connect an outdoor antenna or a cable-TV system).
1. Insert the antenna base into die pocketed slot on the back of your TV until it locks in place.
2. Connect the cable from the antenna adapter to the ANTENNA jack on the back of the TV.
When you mrn on the TV, adjust the length and position of the antenna rods for best reception.
• For viewingVHF channels, extend the rods filll>
• For viewing UHF channels, shorten the rods for best reception.
• Don't use this connection with any other connection.
You can press MENU or CLEAR to make the
Channel Marker
disappear,
or it will
disappear
automatically
after a short time.
Channel Marker
The Channel Marker comes up when you first turn on the TV, change channels, or press the INFO
button.
01:30 Displayed to count down time left on the commercial skip timer.
13 Displays the current channel.
7:17 Displays the current time.
CC Displayed when Closed Captioning is available.
Mute Displayed when you mute the audio.
Sleep Displayed when the Sleep Timer has been set.
Graphics contais_edwitZ, i s+ tZ, i sp_blicatior_arefbr represer_tation osdy. ½_r unit *ni<_ht & 7_br s ligbt{7_
3
Advertisement
Table of Contents
