ProScan PS32108 Owner's Manual page 19

Using Your TV and Remote
With a Laserdisc Player: Programming and Basic Operation
Refer to your Laserdisc Player owner's manual to hook up your Laserdisc Player.
The remote may need to be programmed for your laserdisc player. This
remote may not operate all models of the brands that are shown below. Use
the codes below or on the sheet packed in with your remote.
Program the remote for
your Laserdisc Player
Basic Operation
Laserdisc Player Codes
I ................... 33, 7 Ii
ProScan ..................33,37 li
?OW_. V_ DSSeCABLE TV
REW PLAY FF
REC STOP PAUSE
DISPLAY CHAN SKIP
MUTE CHAN PREV CH
_0 _0 _0
'0 _0 _0
INPUT ANTENNA
0 o0 0
CLEAR .,h • ,oh RESET
PiP _. SWAP
FREEZE
A. Point the remote at the laserdisc
player and hold I_D.
B. Enter the code for your brand
from the code list below.
C. Release LD.
D. Press POWER. If nothing
happens, try pressing LD and
then POWER.
A. Tune TV to channel 00, 03, or 04.
B. Point the remote at the laserdisc
player and press LD.
C. Press POWER to turn it on.
D. Use the buttons on the remote
that relate to laserdisc player
functions. Not all buttons
highlighted may work with
your laserdisc player.
E. Press POWER to turn it off.
15