ProScan PS32108 Owner's Manual page 15

Using Your TV and Remote
With VCRs: Basic Operation
If the remote operates your VCR, this page will show you how to use it
for basic functions. The buttons highlighted below may not all be
compatible with your VCR. Experiment with your VCR to see if they
work, See page 7for more details on buttons used with your VCR.
Turn on the VCR
Turn off the VCR
Record one TV program
and watch another
__ VCR1 DSS'CABLE T!
QO
REW PLAY FF
REC STOP PAUSE
DISPLAY CHAN SKIP
0 0
© ©
MUTE CHA_ PREV CH
10
4O
7O
INPUT
0
CLEAR
PiP
Watch a tape in your VCR
PROSCAN
A. Press channel 00 on the TV to
see what the VCR is doing.
B. Press VGR1 or VGR2 to set the
remote to control the VCR.
C. Press POWER to turn on the
VCR if it did not turn on when
you pressed VCR1 or VCR2.
A. Press VCR1 or VCR2 to set the
remote to control the VCR.
B. Press POWER.
A. Press VCR1 or VCR2 to set the
remote to control the VCR.
B. Tune the VCR to the channel
you want to record using
CHANNEL up and down or
pressing two number buttons.
C. Press RECORD to start
recording.
D. Press TVNCR on the VCR.
E. Press TV to set the remote to
control the TV.
F. Press CHANNEL up or down to
change channels on the TV.
G. To see the channel you are
recording, tune the TV back to
channel 00.
A, Turn on VCR.
B. Insert a tape in the VCR.
C, Press PLAY to start the tape
playing.
D. Press STOP when you are
finished.
E, Press REW to rewind the tape.
11