Parental Control Menu; Time Menu - RCA L42FHD37 User Manual

TV mode Backlight LED Color
Power Level Blue
onStandby 7ff, p.... Level Off
On Mid Power Level Cyan
On Low Power Leve Green
Note: 77_e
connected HDM/
device must be
HDM/ CEC corrvJl£_nt
in order for this
feature to work.
However, some
HDMI devices may
utilize specific
protocols that are not
fully CEC corrJpl£_nt
and may prevent the
feature from working
properly.
Note: These captioning s(yle options only have an effect on true dl_jita/ dosed captions.
Not all captioning on digital channels is digital captioning--it depends on what the broadcaster is
sending. If UTeclosed captioning for a program is not digital, the Digital CC s(yle settings will not
have an effect.
Preferences
Channel Number Display Turn this feature on if you want the channel number always visible.
Language Lets you select your preferred language for the menus: English, Espanolor Francais.
Power Save Mode If no signal is detected from the Input/RF INPUT for 5min, the TV set
goes to standby mode.
Dynamic Backlight Option: On/Oft. If you choose On, the TV will continually monitor the
video content being displayed and will adjust the backlight to achieve optimum contrast levels.
Light Sensor If you choose On, this feature is activated.
When activated, this feature monitors the ambient light conditions in the room and adjusts
the TV's backlight for optimum viewing. It also serves as an energy saving feature by lowering
the backlight power level when appropriate (typically in darker room conditions).
The TV has a multi-colored LED that adjusts based on the backlight power level with <'green"
representing the highest level of energy savings. Please refer to the table at the left for the various
conditions of the backlight power level and LED colors when the light sensor is active.
Note: When TV is On and the Ik/ht sensor is Off, the LED color will be blue.
HDMI CEC (Consumer Electronics Control)
If choose On, the HDMI CEC function is enabled. This feature provides expanded capabilities
when your TV is connected to an HDMI CEC compliant device using a certified HDMI 1.3 cable.
Here is an example using an HDMI CEC compliant DVD player connected to the TV.
Upon activating the feature, the TV searches for HDMI CEC compliant devices that are
connected. In this example, a connected DVD player is found.
When both the TV and DVD player are On and you insert a disc into the DVD player, the
TV will automatically switch to the associated input and initiate play.
When the TV is on and the DVD player is turned on with the disc already loaded, the TV
will automatically switch to the associated input and initiate play.
If you connect another HDMI CEC device and/or change the HDMI input used for an
existing HDMI CEC device, you should turn the HDMI CEC function Off and then turn it
back On again in order for the TV to complete a new search for the connected devices.
Parental Control Menu
The Parental Control menu is explained in Chapter 3. Go to page 31 for more information.
Time Menu
Sleep Timer Use the left and right arrow keys to set the TV to turn off after a given amount of time.
Auto Time Channel Choose a station to have the TV set the time for you. Wait about one
minute for the time to be set.
Time Zone Select the current local time among Atlantic, Newfoundland, Central, Mountain,
Pacific, Alaska, Hawaii and Eastern.
Daylight Saving (DST) Choose between Offand Automatic modes.
Enter Time If you didn't set the time reference channel, enter the current time manually. If
it is 8:00, for example, you must first enter the number zero, then number eight. Use the OK
button to choose between AM and PM.
Wake up Timer Use the left and right arrow keys to choose between Off, Once or Dai!yto set
the TV to turn itself on just one time or at the same time each day.
Note: The Wake up Timer is available only when the time has been set.
Wake up Time Set the time you want the TV to turn itself on. To enter 8:00, for example, you
must first enter the number zero, then number eight. Use the OK button to choose between AM
and PM.
Turn off Timer Use the left and right arrow keys to choose between Off, Once, or Dai!yto set
the TV to turn itself off just one time or at the same time daily.
Turn off Time Set the time you want the TV to turn itself off. To enter 8:00, for example, you
must first enter the number zero, then number eight. Use the OK button to choose between AM
and PM.
40
Using the TV's Menu