Parental Control Menu; Time Menu - RCA L37WD250 User Manual

Using the TV's Menu System
Preferences
Go back
Ch. Number Display
Language
Maximum TV volume
Power Save Mode
Message
Go back
Display
Start Time
Recurrence
Stop Time
Erase Message
Message
Time
Go back
Sleep Timer
Auto Time Channel
Enter Time
Wake up Timer
Wake up Time
Wake up Channel
Turn off Timer
Turn off Time
42
English...
6:00PM...
30min...
...
...
...
03:00 Zzz
12 PBS
8:25PM
Daily...
8:00AM
12
Once...
10:00PM
Preferences
Ch. Number Display Turn this feature on if you want the
channel number always available when you press the CH+ or
CH- button.
Language Lets you select your preferred language for the
menus: English, Español or Français.
Maximum TV volume This feature is intended to prevent
volume from being turned up too loudly. Set the volume at the
loudest level you'd want to hear. Press and hold OK to hear the
maximum volume you set.
Power Save Mode If no signal is detected from the VGA input
jack for 5 minutes, puts the TV in power save mode.
Message Set a message that appears at the bottom of the TV screen.
Press the CLEAR button to clear the message. If Display is turned on,
the message appears when the TV is turned back on after being turned
off.
Display Turns on or off to display a message on the TV.
Start Time Set the time you want to display the message. Not
available if the time hasn't been set in the Time menu.
Recurrence Set how often to display the message- 10min- 60
min.
Stop Time Set the time you want to the message to stop.
Erase Message Clears all lines of text you've entered.
Message Press OK to enter a message. Enter up to 4 lines of
text- 25 characters per line. Press the right arrow button to start
entering text on a line, then press the up and down arrow buttons
to change characters. Press OK when you're done entering text for
a line.

Parental Control Menu

The Parental control menu was explained in Chapter 3. Go to page 29
for more information.

Time Menu

Sleep Timer Lets you set the TV to turn off after a given amount of
time.
Auto Time Channel Choose your PBS station to have the TV set the
time for you. Wait about one minute for the time to be set.
Enter Time If you didn't set the time reference channel, enter the
current time manually. If it is eight o'clock, for example, you must
fi rst enter the number zero, then number eight. Use the OK button to
choose between AM and PM.
Wake up Timer Lets you set the TV to turn itself on.
Note: The Wake up timer is available only when the time has
been set.
Chapter 4