Connecting
a Device with Composite
Video (Good)
This connection
allows you to connect a device that has a Video Out jack, for example, a
DVD player.
Using the example of a DVD player;
1. If necessary, connect your cable and/or off-air antenna as described on page 10.
2. Connect your yellow video cable. Connect a video cable to the (VID1) VIDEO jack on the
back of the TV and to the VIDEO OUTPUT jack on the DVD player.
3. Connect your red and white AUDIO cables. Connect the AUDIO (red and white) cables to
the (VlD1) right and left AUDIO jacks on the back of the TV and to the AUDIO OUTPUT
jacks on the DVD player.
Composite
Video Connection
This is an example of a connection
using the composite
video jack.
Don't forget;
If necessary, connect
antenna OFcable to get
a picture. Go to page
70 for instructions.
Connecting
a Device with Component
Video
(Better)
This connection allows you to connect a device that has Y Pb Pr jacks, for example, a DVD player.
Using the example of a DVD player:
1. If necessary, connect your cable and/or off-air antenna as described on page 10.
2. Connect your Y Pb Pr component
VIDEO cables. Connect three VIDEO cables or special
Y Pb Pr cables to the COMPONENT
INPUT 1 (CMP1) Y Pb Pr jacks on the back of the TV
and to the Y Pb Pr outputs on the DVD player.
3. Connect your red and white AUDIO cables. Connect the AUDIO (red and white) cables to
the Component
Input 1 (CMP1) right and left AUDIO jacks on the back of the TV and to
the AUDIO OUTPUT jacks on the DVD player.
12
i
Connections and Setup