GE 46GW945 User Manual page 46

(CSaaael Menu continued)::
Auto-Tuning Displays a choice list that lets you set up the TV
it_t_(_':_t__aii_t_ine t___l_e_drrect input channel when you :_-;:_
press a component button (VCR1, VCR2eLD, or SAT, CABLE).
Set vC R 11 Channel Displays a choice list that lets you
'select
the channel that the TV tunes to when you press the
:VCR1 button.
.Set DVDNCR 2 Channel Displays a choice list that lets
you _seiect the channel that the TV tunes to when you press
the VCR2eLD button.
Set SATICABLE Channel Displays a choice list that lets
you select the channel that the TV tunes to when you press
the SAT,CABLE button.
The choices are:
Not Connected Choose this if you do not have a
component connected to an antenna or video input'on the
back of the TV, or if you don't want the TV to tune to a
channel when the particular component button is pressed.
Channel 2 (SAT/Cable only) Choose this if your
component is connected to the antenna jack on the back of
the TV, and you want the TV to tune to channel 2 whenyou
press the specified component button. Reminder: Make sure
the c0mponent's Ch 2/314 switch is set to channel 2.
Channel 3 Choose this if your component is connected to
the antenna jack on the back of the TV, and you want the TV
to tune to channel 3 when you press the specified
component button. Reminder: Make Sure the components
Ch 314 switch is set to channel 3.
Channel 4 Choose this if your component is connected to
the antenna jack on the back of the TV, and you want the TV
to tune t() channel 4 when you press_the specified
component button. Reminder: Make sure the component's
Ch 314 switch is set to channel 4.
Video 1 Input Choose this if your component is connected
to the Video 1 jacks on the back of the TV and you want the
TV totune to Video1 inputwhen you press the specified
component button.
video 2_lnput Choose this if your component is connected
to theVideo 2 jacks Onthe back of the TV and you want the
"IV to tune to Video 2 input whenyou press the specified
component button.
z14