To Control An Rca Audio Device - GE 46GW945 User Manual

....Programming the Remote to Control
a Second VCR or Laserdisc Player
The remote's VCR2eLD button is preprogrammed to control the (
primary functions of a GE, ProScan or RCA VCR or laserdisc
L
player. The remote mayneed to be programmed to control other
components. To program the VCR2eLD button to control a
device, use the laserdisc player codes at the right or the VCR
codes on the previous page.
1. Turn on the laserdisc player or VCR.
2. Look up your brand and its code number(s) on the code lists.
3. Press and hold the VCR2-LD button on the remote.
°
5.
Enter the two-digit code from the code list.
Release the vcR2.LD button and press POWER or another
button to see if the device responds to the remote
commands.
6. Repeat these steps using the next code listed for your brand,
until the device responds to the remote commands.
Laserdisc Player Codes
Pioneer ............. .............. ....... 33,37
ProScan ................................ 33,37
RCA ....................................... 33,37
Programming the Remote to Control
an RCA Audio Device:
Your remote controls only RCA audio equipment such as an
audio receiver or amplifier--it does not control other brands of
audio equipment. Also, the remote may need to be programmed
for your equipment. This remote may not operate all models of
the brands that are shown at right. Use the codes below or on
the sheet packed in with your remote.
1. Turn on the component to be programmed.
2. Look up your brand and its code number(s) on the code list.
3. Press and hold the AUDIO button.
4. Enter the two-digit code from the code list.
5. Release the AUDIO button and press POWER or CH ^
(channel up) or CH v (channel down) to see if the audio
device responds to the remote commands.
6. Repeat these steps using the next code listed for your brand
until the audio device responds tothe remote commands.
Audio ,Codes
RCA/Dimensia
AM/FM ....................................... 03
CD ............................................... 07
Tape ............................................ 06
Phono ......................................... 05
Aux ............................................. 04
28