Table of Contents
Advertisement
k
Schedule
does not turn off the TV at the set time
•
Check schedule on/off function (it must be set to On).
•
Check to make sure clock is set to the correct time.
Blank screen
No
Maybethe
device connected to the input jacks is not turned on.
Try another channel.
Press RESET, in case the picture controls are set too low.
sound, picture okay
Maybe sound is muted_ Try pressing volume up button to restore sound.
-Maybe TV's speakers are turned off. Check the Audio Output and Speakers control panel in the Audio
menu.
If using an S-VHS component, remember to also connect the component's L and R AUDIO OUT jacks to
the TV's L and R INPUT 1 jacks.
Can't select certain
channel
•
Channel may be blocked or not approved in the Parental Controls menu.
•
If using a VCR, check to make sure the "I-V/VCR switch on the VCR is in the correct position.
Noisy stereo reception
•
May be a weak station.
•
Maybe the cable/air function is set to the wrong position.
•
Maybe a vacant channel is tuned.
•
If watching VCR (connected only_through antenna input), make sure TV is tuned to channel 3 or 4 - same
as CH3/4 switch on VCR. Also check to make sure TVNCR switch on VCR is in correct position.
Sound
okay, picture
poor
•
Check antenna connections.
•
Try adjusting sharpness function to improve weak signals.
Black
Box appears
on the screen:
•
Captioning may be turned on. Check the Closed-Caption Display control panel in the Channel menu.
What.your warranty covers:
•
Any defect in materials or workmanship.
67
Advertisement
Table of Contents
