RCA VR518 User Manual page 26

BACK PAN EL
ANT.IN
3 CH. 4 Switch Selects the channel to which you will tune the
TV to see the VCR picture if you connect the VCR using the
ANT.IN and RF OUT jacks.
ANT. IN Jack Receives a signal from an antenna or cable system
when attached.
AUDIO and VIDEO IN Jacks Receives signals from another
component, like a VCR or camcorder, when it is connected to
these jacks. Use INPUT on the remote to select.
AUDIO and VIDEO OUT Jacks Sends signals from VCR to
another component, like a TV or VCR, when it is connected to
these jacks.
RF OUT Jack Passessignal to TV using the cable supplied.
I N DICATO R PAN EL
POWER RECORD VCR _MER
POWER Indicator Lights when the VCR is turned on.
RECORD Indicator Lights when the VCR is recording.
TIMER Indicator Lights during an express or timer recording, or
when the VCR is set for a timer recording and the VCR is turned
off. Flashes when the clock is not set, and there is no cassette in
the VCR.
VCR Indicator (Applies Only if the VCR Viewing Channel is 3
or 4). Pressthe TVoVCR button to turn on or off.
• VCR indicator on: Picture from VCR.
• VCR indicator off: Picture from TV channel.