Trouble Checks - RCA F20635 Owner's Manual

Table of Contents

Advertisement

Trouble
Checks
You may have problems that can be fixed with a few minor adjustments.
Look for the type of problem you are having
below and then try the suggestions
to get your TV going again. For warranty information see page 39.
Trouble
Power
TV will not turn on
Checks
and Adjustments
Plug TV in.
Plug something
else into the outlet to make sure it is working.
Make sure batteries in the remote are not dead.
Aim the remote at the TV and press TV.
Make sure batteries are placed in the remote the right way. See batteries on
page 2.
Unplug
TV for a few minutes and then turn it on again.
No picture, no sound but TV has power
Picture
Blank screen or Unusable Signal
appears on screen
Pic_re poor, sound okay
Remote
Buttons do not work when you press them
Works part or none of the time
Can't select certain channel
Check antenna
connections.
Check position of Cable/Air
feature.
See page 27.
Try another
channel.
Inactive channel may be tuned.
Make sure component
connected to the VIDEO INPUT jacks is turned on if you
choose channel 00.
Make sure TV is tuned to the same channel as the switch on back of VCR if
watching
a VCR.
Make sure TV/VCR button on VCR is in correct position.
FM radio may be selected.
Press TV on the remote or turn off the FM radio in
the Controls menu.
See pages 20-21.
Try another channel.
Scan the channels.
Check antenna connections.
Adjust TV picture. See pages 8-9.
Press "IVto set the remote to control the TV. See the buttons on pages 6-7.
Clear the path between the remote and TV of any objects.
Aim the remote at the component you are trying to control.
Press "iV so remote will control TV.
Make sure batteries in the remote are not dead.
See if batteries are placed in remote
correctly. See batteries, page 2.
Press number
buttons.
Channel may not be in memory.
See autoprogram on
page 22.
Make sure "W/VGF!switch on VCR is in the TV position.
For numbers over 100, press and hold 1 until 1-- appears, then press the other
two numbers.
Set Cable/Air
feature to Cable for channels higher than 69. See page 27.
42

Advertisement

Table of Contents
loading

This manual is also suitable for:

F20636

Table of Contents