Insert And Remove Cassettes; Cassette Care And Storage - RCA CC6491 User Manual

Insert and Remove Cassettes
SP/SLP Button EJECT Button
Wheel
PUSH Here to
Close Cassette
Compartment iiiiil i_iiil i!iii _i_i_i_!iii!iiii._iii!i!_!i iii_i_iiiiiiiiiiiiiiiiiiiiiiiiii_ii_iiiiiiiiiiiiiiiiiiii_iii!iiiiiii_iiiii!i_iii_ii_i i_
Before inserting a cassette, turn the tape
wheel on the side of the cassette in the
direction shown to remove any slack in
the tape.
_l _Tape Wheel
1. Open the LCD monitor at least 90*
before opening the cassette holder.
2. Press EJECT. The cassette holder
opens automatically.
3. Insert the cassette with the tape wheel
facing up and tape window facing out.
4. Press on the area labeled PUSH until
the cassette holder locks into place.
Cassette Care and Storage
• When you are finished with a cassette, •
rewind it, remove it from the
camcorder, and label it.
• Store cassettes vertically in their
protective cases at normal room
temperatures. Do not leave your .
camcorder or cassettes in a car or
outdoors for an extended period. .
Excessive heat or cold might damage
your cassettes.
• Keep the cassette away from strong
magnetic fields such as electric motors
and other devices.
Keep dust from entering the cassette
compartment. All dust is abrasive and
causes excessive wear on the tape and
the camcorder's recording or playback
heads.
Do not use cassettes with damaged or
spliced tape.
Do not use a cassette if it has been
damaged or exposed to moisture. The
tape might jam and/or damage your
camcorder.
23