Table of Contents
Advertisement
2. Press the PLAYIPAUSE button
to activate
the Intro feature.
The unit will play the first 10 seconds of each track on the disc and then stop automatically.
PROG RAM PLAY
1. Press the P.MODE button
until the program
indicator
(M) flashes in the display.
2.
Press the SKIP/SEARCH buttons to choose the track you want to hear.
3.
Press the SET button
to store the track number in that memory
location.
The next memory
location
will flash in the display.
4.
Repeat Steps 2 and 3 to store up to 22 tracks.
5. Press the PLAY/PAUSE button
to start the Program Repeat Play mode.
When the last track has played, the unit will automatically
stop.
PROG RAM RE PEAT PLAY
1.
Press the P.MODE button
until the program
repeat indicator
(c',__
M) flashes in the display.
2.
Follow Steps 2-5 above.
When the last track has finished
playing, the unit will automatically
return to the beginning
of
the program
and play it again.
TO CHECK PROGRAM
PLAY LIST
1. Press the P.MODE button
until the program memory
indicator
(M) appears in the display.
2.
Press the SET button
to scroll through
the programmed
tracks one by one in order.
TO CHANGE
THE
PROGRAMMED
PLAY
LIST
1. Pressthe SET button to find the track you want to replace.
2. Choose the track you want to replace it with using the SKIP/SEARCHbuttons.
3.
Pressthe SET button to enter the new track in place of the old one.
TO CLEAR
TH E PROGRAMMED
CONTENTS
In order to clear the program from memory, press the SELbutton to enter the normal play mode
and then open the CD door.
1. Press the STOP button
to end all disc activity.
2.
Press the OPEN button
to open the CD compartment
door.
3.
Grasp the CD by its edge while gently press down on the unit's center spindle.
4.
Lift the CD from the edge and remove it from the compartment.
Advertisement
Table of Contents
