Connecting Your TV
Home Antenna Connections
Follow one of the steps below to connect an indoor or outdoor antenna to your TV (not a cable-TV system).
A
the antenna cable coming f_m your home antenna is a 75-ohm round coaxial cable that carries only VHF (channels 2-13),
only UHF (channels 14-69), or VHF and UHF chapels, connect it to your set like this:
m
Antenna
VHF or UHF Only
or
VHFKIHF Combination
--OR-
B
If the antenna cable
from
home antenna is
300-ohm fiat twin lead that carries
VHF (channels 2-13),
coming
your
a
on]y
only UHF (channels14-69), or VHFandUHFchannels,connect it to your set like this: "
C
D
From
.......
Push on
Back
Home
_
of
Antenna
I"V
VHFor UHF
Only
"'
or
Adapter
VHFKIHF Combination
(supplied)
-OR-
If the antenna cables coming from your home antenna(s) are a 75-ohm round coaxial cable that carries VHF (channels 2-13)
and a 300-ohm fiat twin-lead cable for UHF (channels 14-69), connect them to your set like this:
UHF
Cables
From
and
Home
Antenna(s)
VHF L
Note: Be stu_to connectthe UHF antennacable m the
•UHF sc_ev,_on the AntennaMixer andthe VHF antenna
cable to the screws markedVHF.
Antenna Mixer*
Transformer*
(useonly#193984)
(suchas #AH011 )
-OR-
If the antenna wires coming from your home antenna(s) are two 300-ohm fiat twin-lead cables as shown here, connectthem
to your set like this:
Cables
UHF
From
Home
and
Antenna(s)
VHF
Note: Be sureto connectthe UHF antennacable to the UHF scows on the Ant_
Mix(= and the VHF anumua cable to th©scows markedVHF.
14
Optional accessory available from your dealer. Only use Antenna Mixer (Stock #193984).