Basic Operation (Playback Of A Disc) - Pioneer LaserDisc CLD-D504 Operating Instructions Manual

I BASIC OPERATION (PLAYBACK OF A DISC)
• For the connections, refer to pages 8 and 9.
3 2 4
i ....o L
1 ......__
[ 1 i
o o
I '1J
1
The buttons with the same name on the front panel and remote
control unit have the same functions.
• The STANDBY indicator is lit while the power is OFF.
1. Press POWER.
Set the TV to the function (input) to which the player is
connected.
Front Panel
POWER
POWER
2. Press appropriate OPEN/CLOSE to open the
disc table.
To play an LD
To play a CD
Front Panel
OPEN
/CLOSE
t-r-1
Front Panel
• After using a CD, the CD tray opens when you press OPEN/
CLOSE on the remote control unit. To playback an LD, use
OPEN/CLOSE on the front panel.
3. Place a disc on the disc table.
To place an LD To place a CD
• Place only one disc, LD or CD, at a time.
4. Press _-.
• Playback of the CDV starts with the video part.
STOP
Operations marked with [ _ ] are made from the remote
control unit.
12
Disc placing position
The CD/CDV or single-sided LD should be placed with the label
side facing up and the double-sided LD should be placed so that
the label of the side to be played faces up. Place any disc correctly
along the guide groove provided for each size.
LD disc table : (_
CD single: 8 cm (3 in.)
CD, CDV, video single: 12 cm (5 in,)
LD, LD single: 20 cm (8 in.)
LD: 30 cm (12 in,)
CD disc table :
le: 8 cm (3 in.)
CD, CDV, video single: 12 cm (5 in.)
r- Caution in placing a disc
l Be careful not to deviate a disc from the guide groove on the
disc table, for this will make proper playback impossible and
could cause a malfunction such as disc damage.
For safety! 1
• Be careful not to catch your finger in the disc table when it
draws in. Also take care to prevent a small child from opening
the disc table cover and inserting their hand inside the player to
prevent injury.
• Do not place an object other than a disc on the disc table.
Convenient feature (Auto power-ON function)
• When the power is OFF, pressing OPEN/CLOSE turns on the
power automatically and opens the disc table.
• When you have turned the power OFF with a disc left inside
the player, simply press I_ on the front panel; the power turns
ON automatically and playback of the disc starts.
• The above features cannot be operated with the remote control
unit.
Playback by specifying side A or B
In this description, side A refers to the surface facing up when the
disc is placed on the disc table, and side B refers to the other side.
Note that they are not always the same as disc sides A and B as
recorded on the disc,
It is recommended to place • disc so that the side labeled
"SIDE A" faces upward.
To play side A only; When the disc with the side labeled "SIDE
A" is facing up, press DISC SIDE A without pressing I_ The
player will stop after having played side A. To play side B only;
Press DiSC SIDE B without pressing I_ . The player will stop after
having played side B.
If the disc has been placed with the labeled "SIDE B" facing up,
DiSC SiDE A plays side B and DISC SiDE B plays side A.
Display when the disc side is switched
• Turning from side A • Turning from side. B to
to side B side A
' A
B
<VRB1147>