Advertisement
Noreaction totheremote control.
No video s ignal onthedisplay
device.
No audio
/ video signal on the
display device via HDMI cable.
No high-definition
video signal on
the TV.
No audio signal from the
loudspeakers
of the TV.
No audio signal from the
loudspeakers
of the audio system.
Connect
the product
to the power outlet.
Point the remote control at the product.
Insert the batteries
correctly.
Insert new batteries in the remote control.
Turn on the TV.
Set the TV to the correct external
input.
Select the correct video resolution
using [HDMI].
Press and hold [I_ {PLAY)]
on the front panel for 5 seconds to change the
setting
back to its default.
If the unit is connected
to the unauthorized
display device with an HDMI
cable, the audio/video
signal may not be output.
Does the disc contain
high-definition
video? High-definition
video is not
available
when the disc does not contain
it.
Does the TV support
high-definition
video? High-definition
video is not
available
when the TV does not support
it.
Assign the audio input of the TV to the corresponding
video input.
Turn on the audio system.
Set the audio system to the correct external
input.
Increase the volume
level of the audio system.
No 5.1-channel
audio from the
loudspeakers
of the audio system.
Cannot play back a disc.
SD Memory
Card cannot be read.
Does the disc contain
5.1 -channel audio? The 5.1 -channel audio is not
available
when the disc does not contain
it.
Does the audio system support
5.1 -channel audio? The 5.1 -channel audio is
not available
when the audio system does not contain
it.
In the settings
menu, set "HDMI Audio"
to "Off".
Make sure that the product
supports
the disc.
Make sure that the Blu-ray Disc player supports
the region
code of the DVD
orBD.
(BD: A: DVD: All or 1)
For DVD+RW/+R,
make sure that the disc is finalized.
Clean the disc.
The format of the card does not match that accepted
by this unit or the card
is not compatible.
Cannot play back JPEG files from a
Make sure that the disc was recorded
in the UDF, ISO9660 or JOLIET format.
disc.
Cannot play backWindows
Media TM
Make sure that the sample rate of the Windows
Media TM Audio files is 44.1
Audio files from a disc.
kHz or 48 kHz.
Cannot play back DivX ®files from a
Make sure that the file extension
is .avi, .AVl, .divx or .DlVX
disc.
_in
the upper right hand corner
The operation
is not possible.
of the screen.
Cannot find a JPEG file.
Make sure that the selected group (folder) does not contain
more than
Cannot find a Windows
Media _
Audio file.
Error message appears when I
select "Auto" in the "Player Menu".
9,999 files for DVD, and 999 files for CD.
Make sure that the file extension
is .jpg, .JPG, .jpeg or .JPEG.
Make sure that the selected folder does not contain
more than 9,999 files
for DVD, and 999 files for CD.
Make sure that the file extension
is .wma or .WMA for Windows
Media _
Audio.
Make sure that the unit is connected
to the PHILIPS brand EasyLink TV and
the "EasyLink (HDMI CEC)" is set to "On"
This error message may appear when your TV's OSD language
is not
supported
by this unit.
F
©
o
C)
O
_3
@
£,
©
@
£
E
;CJ"
©
;,®(,,
_2
S_
;3
EN
47
Advertisement
