Advertisement
_
_I1UD
EN.book Page 46 Tuesday, March 17, 2009 1:55PM
• Network
Status
You can check the status of network
settings.
1) Follow steps 1) to 4) in "Connection
Test" on page
43.
2) Use [A /V]
to highlight
"Enable(Custom)",
then
press [OK].
3) Use [A /V]
to highlight
"Network
Status", then
press [OK].
• Network
setting
list will be displayed.
4) Press [BACK _'_] to go back to the previous
screen,
or press [HOME _] to go back to the home menu.
i
,,_
.
,,_ "Advanced
"Network
]
"_ Connection"
HOME
"Settings"
Setup"
,,_ "Others"
,,_ "Disable"
Deactivate
all the network
connection
and settings.
1) Follow steps 1) to 4) in "Connection
Test" on page 43.
2) Use [A /V]
to highlight
"Disable",
then press [OK].
3) Use [A /V]
to highlight
"Yes", then press [OK].
4) Press [BACK _'_] to go back to the previous
screen,
or press [HOME _] to go back to the home menu.
HOME
-_"Settings"
,_"Advanced
"Software
,,_
"Disc
Setup"
,,_ "Others"
,,_ Upgrade"
Upgrade"
You can upgrade the software
by using disc.
1) Follow steps 1) to 3) in "Connection
Test" on page
43.
2) Use [A /V]
to highlight
"Software
Upgrade",
then
press [OK].
3) Use [A /V]
to highlight
"Disc Upgrade",
then press
[OKI.
4) Use [A /V]
to highlight
"Yes", then press [OK].
5) Disc tray will open automatically.
• Insert the disc for software
upgrade and then press
[OPEN/CLOSE_].
6) After completing
loading disc, confirmation
message will appear.
Highlight
"Yes" and press [OK]
to start upgrading.
• It may take a while to complete
the upgrading.
7) After the disc upgrade finishes, this unit will restart
and open the disc tray automatically.
Remove the disc.
:)'_ I,O_d
46
EN
Initialize
the setting,
SD Memory
Card or network
setting.
1) Use [A IV] to highlight
"Settings"
in the home
menu, then press [OK].
2) Use [A /V] to highlight
"Factory
Default",
then
press [OK].
3) Use [A IV] to highlight
the desired setting,
then
press [OK].
"Settings":
All the settings except for the "Parental"
and "Network
Connection"
setting
will be reset to default.
"Format
SD Card" (Available
only when an SD
Memory
Card is inserted):
Initialize
the SD Memory
Card.
"Local
Storage":
Local storage for Player or SD Card (Available
only
when an SD Memory
Card is inserted)
used for BD-Java
will be initialized.
"Network
Settings":
Reset the network
setting
to the default.
4) Use [A /V] to highlight
"Yes",
then press [OK].
• Confirmation
message will appear. Press [OK] to
complete
the setting.
5) Press [BACK _'_] to go back to the previous screen,
or press [HOME _] to go back to the home menu.
not
re
t
d
ne [car_
an
Advertisement
