Advertisement
_
_I1UD
EN.book Page 43 Tuesday, March 17, 2009 1:55PM
Set up the network
connection
settings in order to use the
BD-Live function
with a BD-Live disc.
iiiiiii !ii! liii
iiliiiii lllllllllllllllllllllllllllllllllllllllllllllllll i
"Advanced
.*-"Others"
.*-
"Network
"Connection
HOME .*-"Settings"
.*-
Setup"
Connection"
"*"
Test
After you made IP address/DNS
settings
or when a LAN
cable is connected,
always perform
the connection
test to
check if the connection
is correctly
made.
1) Use CA IV]
to highlight
"Settings"
in the home
menu, then press [OK].
2) Use CA /V]
to highlight
"Advanced
Setup", then
press [OK].
3) Use CA /V]
to highlight
"Others",
then press [OK].
4) Use CA / V] to highlight
"Network
Connection",
then
press [OK].
5) Use CA /V]
to highlight
"Connection
Test", then
press [OK].
Connection
test will start automatically
and the test result
will appear right after the connection
test finishes.
• "Testing.."
: The test is in progress.
• "Pass": Connection
test is successfully
completed.
• "Fail": Connection
test failed. Check the connection
settings.
Press [OK] to go to the list of network
status confirmation
screen.
6) Press [OK] to go back to the previous
screen, or
press [HOME t_] to go back to the home menu.
N_
HOME
"_"Settings"
"_ "Advancedsetup,, "_ "Others"
.._ Connection"'Netw°rk
.._ "Enable(Easy),,
II
Network
settings
are set to the following
settings initially.
(In most cases, you can connect
to the Internet
without
making
any changes to the default
settings.)
- IP Address
Setting
Auto(DHCP)
- DNS Setting
Auto(DHCP)
- Proxy Setting
Do Not Use
- Connection
Speed
Auto
- BD-Live Setting
Allow
If you want to set the network
settings
back to the default
settings
as above, follow the procedure
below.
1) Follow steps 1) to 4) in "Connection
Test" on this
page.
2) Use CA /V] to highlight
"Enable(Easy)",
then press
[OKI.
• The unit will start the connection
test automatically
and the test result will appear right after the test
finishes.
• After the connection
test finishes, press [OK] to go to
network
status confirmation
screen.
3) Press [OK] to activate
the network
settings
and set
the network
connection
automatically.
[HOME _]
to go back to the home menu.
HOME
-_"Settings"
._"Advanced
.._"Others"
.._
"Network
._"Enable
Setup"
Connection"
(Custom)"
I
In following
cases, select "Enable(Custom)"
to set each
setting
as necessary.
-When
connection
test failed with the setting
of
"Enable(Easy)".
- When instructed
by your Internet service provider
to
make specific settings in accordance
with your
network
environment.
• IP Address Setting / DNS Setting
1) Follow steps 1) to 4) in "Connection
Test" on this
page.
2) Use CA /V] to highlight
"Enable(Custom)",
then
press [OK].
3) Use CA /V] to highlight
"IP Address Setting",
then
press [OK].
4) Use CA/V]
to highlight
the desired setting,
then
press [OK].
"Auto(DHCP)"
: If your
router
has DHCP server
function,
select "Auto(DHCP)".
"Manual"
: If your
router
does not have DHCP
server function,
select "Manual".
©
©
6'
o
©
J
@
©
©
@
D
©
©
@
@
EN
43
Advertisement
