Download Print this page

Philips BDP5010/F7A Owner's Manual page 44

Advertisement

_
_I1UD
EN.book Page 44 Tuesday, March 17, 2009 1:55PM
If you select "Manual",
follow the following
instruction
to set the IP address and DNS.
4-a) IP address setting
screen will appear. Enter IP
address, subnet mask and default gateway
with
cursor buttons
and number
buttons.
• Enter the IP address number
after checking
the
specifications
of your router.
• If the IP address number
is unknown,
check the
IP address number
of other devices. (e.g. PC
connected
via LAN cable) and assign a different
number from those of other devices.
After you enter all correctly,
press [OK] to go to the
DNS setting screen.
4-b) DNS setting screen will appear. Enter primary
DNS
and secondary
DNS with cursor buttons
and
number
buttons.
z_DNS
Setting
@ OK
• Enter the numbers
instructed
by your I nternet
provider.
• If the number is unknown,
check the number
of
other devices (e.g. PC connected
via LAN cable)
and assign the same number.
4-c) After you enter all correctly,
press [OK].
• Confirmation
message will appear. Select "Yes"
to complete
the settings.
1} Follow steps 1} to 4) in "Connection
Test" on page
43.
2) Use [A /Vl
to highlight
"Enable(Custom)",
then
press [OK].
3) Use [A /V] to highlight
"Proxy Setting",
then press
[OKI.
4) Use [&/V]
to highlight
the desired setting,
then
press [OK].
• For default settings,
select "Do Not Use".
• If you need to change the proxy setting
as instructed
by your I nternet service provider
to set the
designated
proxy address and port, select "Use".
If you select "Use",
follow the following
instructions
to set the proxy address and proxy port.
4-a) Proxy address setting
screen will appear.
Enter proxy address.
• The keyboard
screen will appear.
z_ Proxy Setting
5) Press [BACK _'_] to go back to the previous
screen,
or press [HOME _] to go back to the home menu.
@ Clear
@ All Clear
@ a/A/@
@ OK
[A/v/<1/1_1
[the Number buttons]
[OK]
X[RED]
[GREEN]
[BLUE]
_[YELLOW]
: Move the highlight.
: Enter number.
: Enter the highlighted
number/word.
: Clear the entered
number
or word.
: Clear all the entered
numbers
or words.
: Switch
between
abc ? ABC ? @!7
: Set the entered
number
or word.
These buttons
can be used in other
network
settings.
44
EN

Advertisement

loading

This manual is also suitable for:

Bdp5010/f7