Table of Contents
Advertisement
CONNECTING
YOUR VCR
Refer to these pages to help you connect your VCR.
JACKS AND
CABLES
RF JACKS AND
COAXIAL
CABLES (F-TYPE)
The RF jacks provide good picture and mono sound quality,
and must be used if audio/video
connections
are not available
for your TV.
These jacks are required for antenna or cable-TV connections.
The RF jacks on the VCR are labeled ANT. IN and RF OUT. The
coaxial cable supplied with your VCR is used to connect the
VCR's RF OUT jack and your TV's antenna
input.
0
RF Jack
AUDIO/VIDEO
JACKS AND CABLES (RCA-TYPE)
The AUDIO/VIDEO
jacks provide
very good
picture
quality
and mono
sound,
and can be used if your TV has
audio/video
input
jacks. For more
information
about
video
line input,
see "How
to Find Your TV's Video
Input
Channel"
in the References
section
of this manual.
These jacks are used for most audio/video
connections
between
components.
The VCR AUDIONIDEO
jacks are
color
coded
(yellow
for video
and white
for audio).
If your TV only has two
inputs
for audio
(stereo),
you
may need a Y-adapter
to hear sound
from
both
channels.
AudioNideo Jack
54
Advertisement
Table of Contents
