Table of Contents
Advertisement
PRO'TECT
PLUS
TM
LOCKING
FEATURE
To disable
the usage of the VCR, or to protect
your timer
recordings,
you can lock the VCR so that the buttons
on the
VCR or remote
won't
work.
To Lock: Press and hold the POWER button
on the remote
for approximately
six seconds. All digits on the front
panel
flash when this feature
is activated.
Digits also flash if you
turn on the VCR while locking is on.
To Lock While a Timer Recording
is in Progress: Press
and hold the POWER button on the remote for approximately
six seconds. All lighted digits on the front panel flash when
this feature is activated.
•
To Unlock: Press and hold the POWER button on the remote for
approximately
six seconds.
Locking
Your
VCR
If a timer recording is programmed,
make sure your VCR is turned off.
Locking your VCR prevents the VCR
from being accidentally turned on.
TIME COUNTER
The time counter
shows the actual
time
it takes to record
a
program
or play back a segment
of a recorded
tape.
It
helps locate the beginning
or end of programs
you taped.
The time counter
resets to 0:00:00
whenever
the tape
is
ejected
from
the VCR.
For example,
if you record
a 30-minute
program
at the
beginning
of the tape
and you want to go to the end of
that
program
to begin
another
recording,
you would:
1.
Press INFO twice to display the time counter,
2.
Press CLEAR to reset the time counter to 0:00:00.
3.
Press FWD to forward
the tape until the time counter
reads 0:30:00.
4.
5,
Press STOR This is the approximate
end of the program.
(You may want to press PLAY to verify.) Now, you can
begin recording
at this spot.
Press INFO twice to remove the time counter from the
screen and return to the normal display mode.
0:30:00
HOURS_
MINUTES
[
SECONDS
Timer Counter on-screen display lists hourS,
minutes and seconds of a segment of tape.
50
Advertisement
Table of Contents
