Table of Contents
Advertisement
2.
Point to the choice that matches the way you have your DVD player
connected to the TV.
3.
Press MENU or OK to continue.
SET TH E SAT/CABLE
CHANNEL
(AUTO
TUNING)
The next step lets you set the SAT/CABLEchannel. When you set the SAT/
CABLE channel, you're telling the TV what channel to tune to when you
press the SATeCABLE button on the remote.
Indicate which input you used to connect a satellite receiver or a cable
box. If you don't have a satellite receiver or cable box connected to the
TV, skip this step or select Not Connected from the SATICABLE Channel
choice list. (For more, see Auto Tuning in the Features and Menus section.)
1.
Press MENU or OK to bring up the SAT/CABLE choice list.
2.
Point to the choice that matches the way you have your satellite
receiver or cable box connected to the TV.
3.
Press MENU or OK to continue.
If You Have Both a Satellite
Receiver and a Cable Box
Connected
to the TV
The remote cannot control both a cable
box and the satellite receiver. If you
choose to have the remote control the
satellite
receiver, you must then use your
cable box remote to control the cable box.
You may, however, prefer to use the
satellite
receiver remote for satellite
programming,
and set your SAT.CABLE
button to control your cable box. It's your
choice.
17
Advertisement
Table of Contents
