Set The Sat/Cable Channel (Auto Tuning) - RCA PS27600 User Manual

INTERACTIVE SETUP
,
Point to the choice that matches the way you have your DVD player
connected to the TV.
3. Press MENU or OK to continue.
SET THE
SAT/CABLE
CHANNEL (AUTO TUNING)
The next step lets you set the SAT/CABLE channel. When you set the
SAT/CABLE channel, you're telling the TV what channel to tune to when
you press the SAT-CABLE button on the remote.
Indicate which input you used to connect a satellite receiver or a cable
box. If you don't have a satellite receiver or cable box connected to the
TV, skip this step or select Not Connected from the SAT/CABLE Channel
choice list. (For more, see Auto Tuning in the Features andNlenus
section.)
1. Press MENU or OK to bring up the SAT/CABLE choice list.
.
Point to the choice that matches the way you have your satellite
receiver or cable box connected to the TV.
3. Press MENU or OK to continue.
If You Have Both a Satellite
Receiver and a Cable Box
Connected to the TV
The remote cannot control both a cable
box and the satellite receiver. If you
choose to have the remote controlthe
satellite receiver, you must then use your
cable box remote to control the cable
box. You may, however, prefer to use the
satellite receiver remote for satellite
programming, and set your SAT.CABLE
button to control your cable box. It's your
choice.
17