Pip (Picture-In-Picture); Operation - RCA P52820BLLG2 User Manual

PIP (PICTURE-IN-PICTURE) OPERATION
The PIP (picture-in-picture) feature lets you display a second,
smaller picture on top of the main picture.
A BRIEF EXPLANATION
Your TV is equipped with a single tuner that tunes to cable or
off-air television signals. The PIP feature on your TV requires a
second video source, like a VCR or satellite receiver to supply the
second picture to the screen. The PIP feature also requires
connecting the second video source to the TV with audio/video
cables.
Main Picture
PIP Buttons
There are seven remote buttons that control the way the PIP
window works:
PIP Brings up the PIP window. Press PIP again to remove the
window.
MOVE buttons Let you move the PIP window to different areas
of the screen.
SWAP Switches, or "swaps," the video from the PIP window
with the main picture.
CH CTRL (Channel Control) Lets you switch channel control
between the PIP window and the main picture.
PIP Z_
SWAP _ MOVE
-- .x7
CH CTRL
A typical use of SWAP is to scan
through channels in the PIP window,
and when you find a channel you lik_
press SWAP to display that channel il
the main picture, sending the currenl
channel to the PiP window.