RCA P52820BLLG2 User Manual page 8

STEP 4
Put batteries in the remote.
Remove the battery compartment cover from the back of the
remote.
• Insert batteries as shown, matching the + and - ends of each
battery in the compartment.
• Replace the cover.
STE P 5
Turn on the TV.
Press TV on the remote, or press POWER on the TV itself.
STEP 6
Read the next section, Using the Menu System, which is a brief
overview of the basic rules for getting around in the menus.
STE P 7
Proceed to section three, Interactive Setup. The interactive setup
routine walks you through the steps needed to fully configure
the TV. The first steps ask you to select your preferred language
for the menu system and to begi n the auto channel search, which
puts available cable TV or antenna signals into the TV's memory.
You can skip any of the steps and return to them later.
• R_¢ERSE _LAY fORW_
REC*VCR. STOP P/,_
• Ce__ 1_3 C,,-q
INF{] GH. SKIP
MU_ ct{- Go _ACK
'O 20 30
GUIDE
©
"IV
If the picture appear.,; to have a
double or triple image, you may have
to adjust the color convergence.
Details (:an be found under the
Screen menu heading in the Quick
Reference section.
6