Remote Buttons - RCA P52820BLLG2 User Manual

REMOTE BUTTONS
POWER When in TV mode, turns off the TV. In VCR mode, and if
programmed, turns on and off most VCRs.
VCR1 If programmed, turns on VCR and puts the remote in VCR
mode. Also turns on the TV.
SAT,CABLE If programmed, turns on satellite receiver or cable
box. Puts the remote in SAT.CABLE mode. Also turns on the TV.
DVD-VCR2 If programmed, turns on DVD player or second VCR
or laserdisc player. Puts the remote in DVD-VCR2 mode. Also
turns on the TV.
AUDIO If programmed, turns on RCA audio component and puts
the remote in audio mode.
TV Turns on the TV and puts the remote in TV mode. Also
displays channel information.
REVERSE, PLAY, FORWARD, REC*VCR+, STOP, PAUSE If
programmed, provides transport control for some remote-
controllable VCRs, DVD players, laserdisc players, tape decks, and
CD players. Pressing REC-VCR+ when using the TV GUIDE Plus+
system sets the VCR to record a program.
MOLl- or VOL + Decreases or increases the TV's volume.
CH " or CH v Scans up or down through the current channel list.
Press once to change the channel up or down; press and hold to
continue changing channels.
INFO Brings up channel information. Press repeatedly to see
detailed program information, if available.
SKIP Press once before changing channels and the TV will wait
30 seconds before returning you to the original channel. Press
repeatedly to add more time.
MUTE Reduces the TV's volume to its minimum level. Press
again to restore the volume.
GO BACK Returns you to the previous channel.
(0-9) Number Buttons Enters channel numbers and time
settings directly though the remote control. To enter a two-digit
channel, press the two digits. To enter a three-digit channel,
press and hold the first digit, then add the second two. Example:
to tune to channel 123, press and hold 1, press 2, then press 3.
R VCR1 SAT_CABLE TD
© O
DVDoVCR2 AUDIO
© Q
REVERSE PLAY FORWARD
REC'_VCR÷ STOP PAUSE
r-.-1 _______1 rT_
INFC) CH÷ SkIP
o
CHo
MUtE GO BACK
FAV°INPUT ANTENNA
0 00J 0
CLEAR , RESET
PIP _ SOUND
<> <>
SWAP q MOVE [_ CHCTRL
GUI£,E
©
I For more details, see the previous
section, Programming the Remote.
36