The Buttons On The Remote Control - RCA F25433 User Manual

Connections & Setup
0
VO L GO CHAN
The Buttons on the Remote Control
0-9 (Number buttons) Enter channel llLIlnbcrs :rod time settings directly
through the remote control.
To enter a two-digit channel, press the tv,o digits. ]k) enter a fluee-digit channel,
press and hold the first digit lk)r two seconds until two d:lshes appear to the
right of the number, then add the second two. Exat_lplc: to tune to channel 123.
press and huM 1 [k_rtwo seconds, press 2, then press 3.
Arrow buttons (up, down, left, right) Press file arrow buttons to move
through the on-screen menu system.
CH (up and down) buttons Scan up or down through the current channel Hst.
Press once to change the
challi'lu[
Up
or d()'wfl;
press and huM tu contil3LIC
changing channels.
CLEAR Removes any menu or display from the screen and returns you to
TV viewing.
GO BACK Returns you to the previous channel.
GUIDE Press GUIDE to make the GUIDE Plus+ system appear on the screen.
Press GUIDE again to remove it from the screen.
INFO Displays channel information.
MENU Displays the TV's Main menu. You can also press and hold for 2 seconds
to display the GUIDE Plus+ system.
MLrFE Lowers the volume to its minimum level. Press again to restore volume.
OK When a menu is on the screen, press OK to select the item that
is highlighted.
POWER Turns the TV on and off.
SKIP If you press this button before you change the channel, the TV waits 30
seconds and automatically goes back to the original channel. Each time you
press SKIP, you add 30 seconds (i.e, if you press SKIP two times before you
change the channel, the TV waits 60 seconds and automatically turns back to the
original channel).
SLEEP Allows you to select the amount of time you want to give the TV before
it shuts itself off.
VOL (up and down) buttons Decrease or increase the TV's volunle.
20 Chapter 1