Vcr Plus+®Timer Recording (Dvd Mode Only) - Philips DVDR600VR Owner's Manual

E9480UD_EN.qx3 04.7.22 8:26 PM Page 46 <_
46 VCR Plus+®Timer Recording(DVD mode 0nly)
A PlusCode ® number is a number of up to eight digits, printed in most TV
guides next to the start time of a TV program.You can schedule a timer
recording quickly by entering the code for your TV program.
Before you begin, complete theVCR Plus+® channel setup. See page 29.
_2 Before you begin, make sure the Recorder is in DVD mode. Press DVD so
the DVD light appears on the front of the Recorder:
Press VCR Plus+/TIMER on the remote control.
Press • to select VCR Plus+ system, then press II_.
Tim_l
[ _ VCRPlus+ system •
Press the Number buttons to enter the PlusCode number
from your TV guide, then press OK. If you make a mistake,
press CLEAR to erase the PlusCode number, then enter it correctly.
Information about the timer will appear: If information is missing or
not available, you may be asked to enter more information. Follow
the instructions on the screen.You may be asked to enter a channel
number if you have not set upVCR Plus+ channels. See page 29.
Timer
VCR Plus+system
PMsO0de numbe/
I I
M0_Pf_eekly Tost0fe
P{ess S ELEDT P{ess Ol_ i
If the timer recording information seems correct and com-
plete,
press OK. Stored will appear" at the bottom of the screen
briefly.The Timer menu will reappear.
Timer
VO£ Plus+sys_nl
Ree
Date Oh Sta_ End Mode
10/24 122 OMOOAM@M1
PHILIPS
AM/PM Tostore
P{ess SELECT P{essOK
Press VCR Plus+/TIMER to remove the menu,
Put a recordable DVD+RW or DVD+R in the Recorder.
Press STANDBY-ON ® to turn off the Recorder at least
five minutes before the timer recording is set to begin.The
Recorder" must be off in order" for" the timer recording to occur.
If you plan to play a DVD+R on another DVD Player,finalize the Disc.
See page 55.
To edit your recordings, see page 54. However, editing changes may nat be
accessible when you play the Disc on other DVD Players.
Helpful Hint [
• You cannot select VCR Plus+ [
system if six timer recordings I
are set. Delete a recording first. [