Philips DVDR600VR Owner's Manual page 59

E9480UD_EN.qx3 04.7.22 8:26 PM Page 59 <)
AccessControl (cont'd) 59
Locking or Unlocking Specific Discs
Not all Discs are rated or coded by Parental levels.You may choose to
specifically lock or unlock a Disc by choosing Play once or Play always.This
way, you can disable viewing regardless of the rating of a DVD. You will
need to know your four-digit code in order to view the Disc.
_#Before you begin, make sure the Recorder is in DVD mode. Press DVD so
the DVD light appears on the front of the Recorder:
Insert a Disc. The Access Control message will appear on the TV
screen. (Child Lock should be Locked. See page 58.)
Press • orV to select Play once or Play always.Then, press
the Number buttons to enter your four-digit code.
If you select Play Once, the Disc will play one time. If you stop play-
back, open the Disc tray, or turn off the Recorder's power, the
Access Control screen will reappear when you try to play the Disc
again.
If you select Play Always, the Disc will play even if you turn off the
Recorder, open the disc tray, or set Child Lock to _ (Locked). See
page 58.
If you later decide to loci<the Disc so it will not play always:
When you insert the Disc, safe(_ appears on theTV screen.Press
STOP • while safe (_ is on the TV screen, Locked (_ will
appea_: If the Disc continues playing, press STOP • again to stop
playback.You may need to turn off the Recorder or remove the Disc
before the Disc is completely Locked.The next time you turn on the
Recorder or try to play the Disc, theAccess Control screen will
appea_:The Disc will not play unless you enter the four-digit code.
_E_O_
@@@@
VCR P]_ _l_R _N_ C_L
©@©@
@@@
D_ _S_M
Insert a Disc.
Helpful Hints
The Access Control screen will
appear when you try to play a
Locked Disc. If you do not know
your code, press STOP •.Then,
select Access Control as
described in steps 1-3 on page
58. When you are asked to
enter the code, press STOP•
four times (no indication will
appear in the menu). Press SYS-
TEM MENU, then press PLAY_-
to start playback.This restores all
the Access Control settings to
their original factory settings. Al!
Discs can play, and you should
set a new code.
Two-sided DVDs may have a dif-
ferent ID for each side.To unlock
the entire Disc, unlock each side.
Mufti-volume Disc sets may have
a different ID for each volume.
Unlock each volume.
o