Use Your Tv; Switch Yourtv On/Off Or To Standby; Watchtv - Philips 52PFL7603D User Manual

4. Use yourTY
This section helps you perform basic TV operations.
4.1 Switch yourTV on/off or to standby
To switch theTV on
• Press _ POWER at the right side of the TV.
4.2 WatchTV
Switch channels
I. Press a number (I to 999) or press CH+ or CH- on your remote
control.
For digital channels, press a number (1 to 999) followed by a dot
.... and then the corresponding sub channel number (1 to 999). Ex.
108.30.
2. Press PREV CH to return to the previously viewed TV channel.
gEM0
To switch to standby
• Press _ on the remote control.
@ Note
You can atso switch channels by pressing CHANNEL - or + on the
side controls of the TV.
Adjust volume
1. Press VOL+ or VOL- on your remote control.
2. Press MUTE on your remote control to mute the sound.
Press MUTE again or press VOLUME - or + to restore the sound.
To switch on from standby without the remote control
• Press _ POWER at the right side of the TV to switch the TV off.
• Press IO POWER again to switch the-iV on.
To switch off
• Press IO POWER at the right side of the TV.
@ Note
Energy consumption contributes to air and water pollution. When the
power cord is plugged in, yourTV consumes energy. Your TV has a very
low standby power consumption.
@ Note: You can also adjust the volume by pressing VOLUME - or +
on the side controls of theTV.
To increase the headphone volume, press the volume button on the TV
or remote control.When headphones are plugged into the TV, the loud
speakers are automatically muted.
EN-IO