Update Yourtv Software; Check Your Current Software Version; Prepare For The Software Upgrade; Upgrade Software - Philips 52PFL7603D User Manual

7. Update yourTV software
Philips continuously tries to improve its products and we strongly
recommend that you update the TV software when updates are
available.
New software can be obtained from your dealer or downloaded from
the www.phiEps.com/welcome website. Use the type number of
yourTV (e.g. 42PFLS603D/27) to find information.
For information about using a USB device, see Notes for the use of USB
devices on page 36.
7.1 Check your current software version
1. Press MENU on the remote control and select |nstallation >
Current sof_:ware [nfo.
_ TVmenu PH|LIPS
Installation
Download the software
1. On your PC, open a web browser and go to www.phiJips.com/
welcome.
2.
3.
Find information and software related to your TV and download the
latest software upgrade file to your PC.
Decompress the ZIP-file and copy the "autorun.upg" file to the
root directory of your the USB device.
7.3 Upgrade software
1. Prepare the software upgrade as described above.
2. Connect your USB device to the USB port on the side of yourTV.
The TV scans the USB device for the updated software and
automatically enters the upgrade mode.
3. Read the instructions on-screen and confirm that you want to
continue with the installation.
You see a screen similar to this.
PH|! |PS Software Upgrade Application
Upgrade busy...
The version and a description of the current software is displayed.
7.2. Prepare for the software upgrade
You require the following equipment:
• A PC with web browsing capability.
• An archive utility that supports the ZIP-format (e.g. WinZip for
Windows or Stufflt for Mac OS).
• A USB memory stick.
Note:
• Only FAT/DOS-formatted portable memory is supported.
• New software can be obtained from your dealer or can be
downloaded from the www.philips.com/welcome website.
• Use only software upgrades that can be found on the Phitips web
site.
O Warning:
• Do not remove the USB device during the software upgrade.
• If there is a power drop during the upgrade, do not remove the
USB device from the TV. TheTV will continue the upgrade as
soon as the power comes back.
• If you try to upgrade
to a software version lower than the current
version, a confirmation message wilt be displayed. Downgrading to
older software should be done only in case of real necessity.
• If an error occurs during the upgrade, retry the procedure or
contact your dealer.
4. When the software upgrade is complete, remove the USB device.
5. Disconnect the TV from the power socket outlet.
6. Reconnect the TV to the power socket outlet.
7. Press Power _ at the side of the TV to switch the TV on.
The TV starts up with the new software.
EN-28