ON_FF
Press the _
button.
Select the operation mode by pressing the
button.
Each time this button is pressed, the operation mode
is changed
in sequence:
f_ (I FEEL,,.)
-_ _ (COOL)
6 (DRY) _ _ (FAN)
To stop operation:
m
Oh_3FF
Press the Q
button.
After the operation
mode is set once, the operation
starts in the mode set previously
from the next time
by simply pressing the _
button.
®
When
the set temperature
is to be changed:
,,,%
•
Press the _
button to lower the temperature,
One
press lowers the temperature
by about 2 °F.
•
Press the _
button to raise the temperature.
One
press raises the temperature
by about 2 °F,
•
The temperature
control (temperature
setting) can-
not be done.
•
The room temperature
is slightly lowered in this op-
eration mode.
The details of the display on the indoor unit
are explained on page 7.
I
NOTE
When the ambient temperature
is too high, the room tem-
perature may not reach the set temperature
since the unit
operates to cool under high load.
8