Table of Contents
Advertisement
procedure
(see illustration
on the following
page)
C> Important:
Important:
O
Connect the incoming cable or :antenna to ANTENNA IN terminal on
the VCR.
Connect
one end of a coaxial
cable to the ANTENNA
OUT terminal
on the VCR.
O
O
O
Connect
the other end of the cable to the antenna
terminal
on the TV.
Connect
an RCA pin-type
video cable to the VII)EO
OUT te_ainal
on
the back of the VCR.
Connect
the other end of tl:,is cable to the VIDEO
INPUT
terminal
on the back of the television.
If you are connecting a Super VHS (S-VHS) VCR, use a Super Video
cable instead of an RCA pin-.type video cable. Connect a Super Video
cable to the S-VIDEO OUT terminal on the VCR. Connect tile other
end of this cable to the S-VIDEO INPUT terminal on the back of the
television.
Connect
a set of RCA pin-type
audio cables 'to the AUDIO
OUTF'UT
terminals
on the back of the VCR. Use the red cable to connect
the right
(R) channel
and the white cable for connecting
the left (L) channel.
t_
Connect the other ends of this cable to the AUDIO INPUT terminals
on the back of the television.
O
O
If your VCR is monaural (non-stereo), you will only connect a single
RCA pin-type audio cable. Connect the cable to the VCR, then connect
the other end of the L (LEFT) audio input on ,Lhcback of the television.
Set the VCR to the playback mode.
Select the external input source by using the INPUT button on :Lhefront
panel or remote control.
Basic Connections
34
Hide quick links:
Advertisement
Table of Contents
