Appendix C: Lamp Cartridge Replacement - Mitsubishi Electric DLP WD-52631 Owner's Manual

Dlp projection television
Hide thumbs Also See for DLP WD-52631:
Table of Contents

Advertisement

Appendices
93
Appendix C: Lamp Cartridge Replacement
A
BURN DANGER!
During
normal
operation,
the surfaces
inside
the TV near the lamp
are extremely
hot.
TOUCH THE LAMP CARTRIDGE BY THE HANDLE ONLY
Do not touch the glass parts of the lamp cartridge.
CAUTION:
if the television
is on, press POWER to turn it off. Unplug
the television
and allow
it to cool for at least one hour before
attempting
to replace
the lamp cartridge.
Lamp Life
The light source for this television is a lamp, which is part of a lamp cartridge assembly.
The life of the lamp can vary,
based on the lamp itself, the air temperature
around the TV while it is operating, and your viewing patterns.
Warmer air
or poor ventilation shorten the lamp life, as does turning the television on and off frequently.
Mitsubishi warrants the
lamp for one (1) year from the date of original purchase at retail. It is likely that the lamp will last much longer than this.
Order a new lamp when the TV picture becomes
noticeably
dimmer.
It is best to have a replacement
lamp on
hand before the existing lamp fails.
To Order A New Lamp
While Under Warranty
After Warranty
Call (800) 553-7278.
Please have model number, serial
Visit our website at www.mitsuparts.com
or
number, and TV purchase date available,
call (800) 553-7278.
Order lamp part number
915P049010.
WARNING
=
Do not remove the lamp cartridge immediately after turning off the television.
You may get burned because the
lamp is very hot. Allow the television to cool for at least one hour before replacing the lamp cartridge.
Do not remove the lamp cartridge except when replacing it. Careless treatment can result in injury or fire.
Do not touch the lamp glass element.
It may be very hot and break, causing injuries or burns.
Be sure not to insert any metal or flammable object into the lamp cartridge opening, as it may cause fire or electri-
cal shock.
If a foreign object is inserted into the opening, unplug the AC cord of the TV and contact your dealer for
service.
Install the lamp cartridge securely.
Failure to do so may cause a fire.
Do not touch the lamp glass elements.
Oils from your fingers may cause premature lamp failure.
= MERCURY
THE LAMP INSIDE THIS PRODUCT CONTAINS MERCURY AND MUST BE RECYCLED OR
DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. For disposal or recy-
cling information,
please contact your local authorities or the Electronic Industries Alliance at
www.eiae.org

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dlp wd-65731Dlp wd-57731

Table of Contents