Switching Between Analog And Digital Ieee 1394 Outputs - Mitsubishi Electric DLP WD-52631 Owner's Manual

86 Chapter 7. Using IEEE 1394 Devices
Switching Between Analog and
Digital IEEE 1394 Outputs
To enable switching between analog and digital outputs,
you must have check marked the Analog Connection
box when the New 1394 Device screen displayed when
you first connected the device. See the section "Before
You Begin" in chapter 2, "TV Connections."
Figure 5. The ClearThought Auto Input sensing screen
for IEEE 1394 devices. Place a check in the Analog
Connection box if your device has both analog and digital
outputs.
1. Press INPUT t o display the Input Selection menu.
2. Highlight the icon for the IEEE 1394 device.
3. Press A Y to switch between icons representing the
analog and digital outputs of the device. See figure
6.
Figure 6. The Input Selection menu shows icons for the
analog and d_gital outputs of the IEEE 1394 device.
4. Press ENTER to select the device output.