Setting Current Time - Mitsubishi Electric Mr.Slim MSY-GA24NA Operating Instructions Manual

Hide thumbs Also See for Mr.Slim MSY-GA24NA:
Table of Contents

Advertisement

Available languages

Available languages

Before
operation:
Insert the power supply plug into the power outlet and/or
turn the breaker on.
Installing
the remote
controller
batteries
..... PressRESET
4"2
,,. e oveth;ont,,,
'a,:elrit?eA tteries
Install the front lid
Make sure the polarity of the batteries is correct.
Do not use manganese
batteries. The remote controller could malfunction.
Do not use rechargeable
batteries.
Replace all batteries with new ones of the same type.
Batteries
can be used for approximately
1 year. However,
batteries with
expired shelf lives last shorter.
Press RESET gently using a thin instrument.
If the RESET button is not pressed, the remote controller
may not operate
correctly.
Setting
current
time
Press CLOCK
Press CLOCK again
Press the TIME buttons to set
the time
Each press increases/decreases
the time by 1 minute (10 min-
utes when pressed longer)
Press CLOCK gently using a thin instrument.
_!-[P--,_--/I
,_?'r,
Changing
temperature
units
(°F--+°C)
Unit is preset with °F.
]i ,
Press RESET while
the temperature
but-
tons are pressed.
• Press RESET gently using a thin instrument.
To change temperature
unit from °C to °F, press RESET.
I
En-4

Advertisement

Table of Contents
loading

Table of Contents