Mitsubishi Electric Mr.Slim MSY-GA24NA Operating Instructions Manual page 8

• OPERATING INSTRUCTIONS •
ECONO COOL
Press 8L_J during COOL mode _ to start
ECONO COOL operation.
The unit performs swing operation vertically in various cycle according
to the temperature of the unit. Set temperature is set 4°F (2°C) higher
automatically.
ECONO COOL
Press (_ again to cancel ECONO COOL operation.
• ECONO COOL operation also is cancelled when the VANE or POW-
ERFUL button is pressed.
What is "ECONO COOL"?
Swing air flow (change of air flow) makes you feel cooler than constant air flow.
So, even though the set temperature is automatically set 4°F (2°C) higher, it is
possible to perform cooling operation with keeping comfort. As a result, energy
can be saved.
POWERFUL
Press _ during COOL mode _ to start
POWERFUL operation.
Fan speed : Exclusive speed for POWERFUL mode
Horizontal vane : Set position, or downward airflow position during
AUTO setting
• Temperature cannot be set during POWERFUL operation.
POWERFUL
Press _ again to cancel POWERFUL operation.
• POWERFUL operation also is cancelled automatically in 15 minutes,
or when the ON/OFF, FAN, or ECONO COOL button is pressed.
@START @STOP
__ Press _ or [_ during operation to set the timer.
QSTART
(ON timer) " The unit will turn ON at the set
time.
@STOP
(OFF timer) " The unit will turn OFF at the set
time.
* ®÷1 or ®÷0 blinks,
* Make sure that the current time is set correctly,
| Press | (Increase) and | (Decrease) to set the
time of timer.
Each press increases or decreases the set time by 10 minutes.
QSTART @STOP
Press _ or [_ again to cancel timer.
Note:
• ON and OFF timers can be set together. ,_t mark indicates the order of timer
operations.
• If power failure occurs while ON/OFF timer is set, see _ "Auto restart
function"
En-7