Select The Dryness Level - Maytag SG1000 Operating Instructions Manual

With electric & gas dryer, with computer touch control
Hide thumbs Also See for SG1000:
Table of Contents

Advertisement

I.
SELECT THE DRYING
CYCLE
Regular
--
Use this cycle for nonpermanent
press loads such as towels, underwear,
etc. If you touch the "Regular" pad, the dryer will
immediately begin operating, automatically selecting the regular temperature
and the normal dryness level. ("E2" appears
in display.) At the end of the cycle there is a 5-minute cool period ("Cool" light turns on), and an electronic tone will sound
four times when the dryer shuts off. During the cool down period, the cool time remaining is shown in the display.
Permanent Press --
Use this cycle for permanent
press loads or no-iron fabrics such as nylon, acrylic, polyester or blends. If you touch the
"Permanent
Press" pad, the dryer will immediately begin operating,
automatically
selecting the regular temperature
and
normal dryness level. ("E2" appears in display.) At the end of the cycle there is a 10-minute cool-down
period.
("Cool"
light turns on.) The display counts down the last 7 minutes of the cool_down period with the electronic tone sounding 4
times every 20 seconds. The signal can be turned off by touching
the "Signal On/Off"
pad.
NOTE:
You can change back and forth from Regular to Permanent
Press program any time during the cycle.
m
SELECT
THE
DRYING
TEMPERATURE
Regular
Temperature
--
This temperature
is automatically
selected
on both
the Regular
and
Permanent
Press programs
and would
be used for
drying
most Regular
and Permanent
Press loads. This would include
those garments
labeled
"Tumble
Dry," "Tumble
Dry
Medium,"
etc.
Delicate
Temperature
--
Touch
the "Delicate
Temp"
pad
to select
this temperature;
touch
the pad
again
to cancel
the delicate
temperature
selection
(returns
to regular
temperature).
Use the delicate
temperature
for drying
those
heat sensitive
garments
labeled
"Tumble
Dry Low,"
"Tumble
Dry Warm,"
etc.
a
SELECT
THE
DRYNESS
LEVEL
E1
Less Dry --
To select this dryness
level, press the "LESS"
pad.
This setting
would
be used for lightweight
synthetic
loads or loads you
wish to have slightly
damp.
E2
Normal
Dry --
This dryness
level is automatically
selected
on both the Regular
and Permanent
Press programs.
This dryness
level would
be used for the majority
of loads.
E3
More Dry
--
To select
this dryness
level,
press the "MORE"
pad.
This setting
would
be used to completely
dry heavyweight,
hard-to-
dry loads such as rugs and
work clothes
or for extra
dryness
of any load.
NOTE:
The "OFF"
pad can be touched
any time to shut off the dryer,
canceling
all selections.
After removing
a load, if a
symbol
remains
in the display,
clear
it by touching
the "OFF"
pad.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Se1000

Table of Contents