Maytag MDB-3 User Manual page 5

REMOVABLEUTENSIL
BASKET
(Design varies by model)
For best cleaning results, prevent items
from nesting together by placing some
items in the basket with handles up and
some with handles down. Load knives,
handlesup and spoons and forks handles
down, through the slots in the hinged
coveredsection(s)(when closed).
Be sure that thin, finely pointeditemsdo
not extend through the basket.
This could block the lower
washarm.
Small, lightweight items
like baby spoons and
plasticmeasuring spoons
should be placed in the
section(s) with the hinged
cover(s).
ODDS & ENDS BASKET
(Select models)
Usethis supplemental basketin theupper
rack for loading miscellaneousitems and
utensils.This is also a safe
place to load sharp
knives and
pointed
items.
SPLIT & FIT UTENSIL
BASKET
(Select models)
"The split silverware basket can be
separatedandplacedin severallocationsin
the bottom rack. Hold the basket firmly
alongthe sides.Followthe unlockdirection
arrows imprintedon the basket and slide
the basketapartuntilit splitsintotwo. Load
flatware and utensils into
_th sectionsorjust one,
dependingupon your
load.
REMOYIHG Tile UPPER RA(K
The upper rack can be removed whental]
or oversizeditems need to be loaded into
the lower rack. Unload the rack prior to
removing.
TO REMOVE:
>- Roll the upper rack 1/3 to 1/2 of the
wayout.
:_ Removetheplasticrack stop from the
end of each track. To remove each
plastic rack stop, push inward
(towardsthe rack) on the ridged area
of the rack stop. The rack stop will
snap open and can be easily removed
by pulling straight out. Take care to
supportthe track while removingrack
stops.
Roll the rack all the way out of the
track and remove from the
dishwasher.
Reverse the above procedure to
replace the upper rack into the
dishwasher.
Rack Sto