Philips 32PFL3514D User Manual page 10

Connect
to an antenna
Any DTV programs that are broadcast in your area can be received for
free through an antenna connection.
Contact your local content provider or your local electronics retailer if
you are unsure about what HDTV programs are available in your area.
Broadcasters are transitioning from analog to digital TV.This means that
a given broadcaster can have channels available either in analog or in
digital, or both analog and digital at the same time.
TheTV produces stereo sound only ifa stereo signal is broadcast.
Connect to a cable
When yourTV is connected to the cable socket, you might receive free
digital and high definition programs (depending on your cable provider).
The channel number for digital and high definition channels includes a
dot "." For example, 11.1,46.30, 108.20I. Contact your cable provider
for more information.
Connect to a Direct Broadcast Satellite (DBS)
There are two main DBS systems: DirecTV and DishNetwork.These
systems require a separate, proprietary set-top box to decode signals
and send them to theTV.The set-top box contains a digitaITV tuner for
receiving off-air digital broadcasts.
Contact your local DBS provider for more information about the
connections and theTV channels.
Connect to a set-top box
A cable box or satellite set-top box can be connected to theTV
through the following connections:
• ANT
• A!V (ComposfteVideo and Audio)
• S-Video
• YPbPr (ComponentVideo Input)
• HDNI
For information about how to connect a set-top box, see the Quick
Start provided.
Connect a set-top box through RF IN/OUT
IftheTV is connected to a cable box or satellite set-top box via a
coaxial connection, set theTV to channel 3 or 4, or to the channel
specified by the service provider.
32PFL3504D/32PFL3514D
] ..........
ii i ii
ii iii
42PFL3704D
......................... .......................... i iii ¸
EN 9