Aspect Ratio; Intelligent Iso - Panasonic Lumix DMC-TZ4 Operating Instructions Manual

USing REC menu (Contin.ed)
Aspect ratio of picture can be changed according to printing or playback format.
• Set-up: Mode dial I_ O SON1 S ON2 B -_ Press 'MENU/SET' -_ Select 'ASPECT
RATIO' (R20)
•Settings:
I_1_ 4 _
(Still pictures only)
9
Same as 4:3 TV or computer Same as normal film camera For playback on widescreen/
high definition TV
@Edges may be cut off when printing - be sure to check in advance,
Camera automatically adjusts ISO sensitivity and shutter speed according to movement
of subject to avoid blur, Higher ISO sensitivity reduces subject blur and jitter but can
increase interference, Please select maximum ISO sensitivity according to table below,
• Set-up: Mode dial O -+ Press 'MENU/SET' -+ Select 'INTELLIGENT ISO' (R20)
• Setting s: / _ / _ /
Setting guide
Mov _bj ,
ISO sensitivity Low Hiqh
Shutter speed Slow Fast
Interference Low Hi_lh
@Slow-moving subject
ISO sensitivity 200
(Shutter speed 1/30)
@Fast-moving subject
6
VQT1 P79
ISO sensitivity 800
(Shutter speed 1/125)