Panasonic Lumix DMC-TZ4 Operating Instructions Manual page 153

Table of Contents

Advertisement

==Available types in each mode ( :
default setting)
0 ©*_ 0
© © ©-
©
© © © -©
0
- • -
;0; ;0;
0
0
-
0
0
0
0
0
-
0
0
C)
C)
0
0
0
0
0
_£!ii
0
ililiii ii!!iiil- iiiliiiiiiliil
0
©
_i!iiiliiiii 0
0
0
0
0
0
0
0
0
0
0
0
0
•1 Set to _
(AUTO), _
(AUTO/RED-EYE reduction), orl
(SLOW SYNC./RED-EYE
reduction) according to subject and brightness.
•2 DMC-TZ5 only _3DMC-TZ4: _r_], [_j[_j,
• Cannot be used with MOTION PICTURE mode l{_ and scene modes E_, m, _,
[],
[],
IW, orig.
==Focus
range
according
to ISO sensitivity
and zoom
M
Max
Approx. 0.6-5.3 m (1.97-17.4 feet)
Approx. 0.6-1.6 m (t .97-5.25 feet)
Approx. 0.6-2.3 m (1.97-7.55 feet)
Approx. 0.6-3.3 m (1.97-10.8 feet)
Approx. 0.8-4.7 m (2.62-15.4 feet)
Approx. 1.15-6.7 m (3.77-22.0 feet)
iNTELLGENT
Approx. 0.6-3.3 m (t .97-10.8 feet)
iSO
Approx. 0.8-4.7 m (2.62-15.4 feet)
iSOMAXi600 Approx. 1.15-6.7m (3.77-22.0feet)
!HIGHSENSi!
Approx. 1.15-13.5m (3.77-44.3feet) Approx. t .0-9.1 m (3.28-29.9 feet)
Approx.
1.0-3.6 m (3.28-11.8 feet)
Approx.
t,0-1,1 m (3.28-3.6t
feet)
Approx.
1.0-1.6 m (3.28-5.25 feet)
Approx.
1,0-2,2 m (3.28-7.22 feet)
Approx.
1.0-3.2 m (3.28-10.5 feet)
Approx.
1.0-4.5 m (3.28-14.8 feet)
Approx.
t,0-2,2 m (3.28-7.22 feet)
Approx.
1.0-3.2 m (3.28-10.5 feet)
Approx.
t,0-4,5 m (3.28-14.8 feet)
@Do not touch or look at the flash (1:'.14)from close distances
(i.e. a few cm).
Do not use the flash at close distances
to other subjects
(heat/light
may damage
subject).
@ Flash settings may be changed when changing recording mode.
@Scene mode flash settings are restored to default when scene mode is changed.
@ Edges of picture may become slightly dark if using flash at short distances without using
zoom (close to max. W). This may be remedied by using a little zoom.
@If flash is to be emitted, flash type marks (e.g. _]lm)
will turn red when shutter button is
pressed halfway.
@No pictures may be taken if these marks (e.g. _)
are flashing (flash is charging).
@ Insufficient flash reach may be due to inadequately
set exposure or white balance.
@ Flash effect may not be fully achieved with high shutter speeds.
@ Flash charging may take time if battery is low, or if using flash repeatedly.
@When using 'AUTO LCD OFF' (P.24), LCD monitor is shut off while flash is charging.
VQT1P79
39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents