Panasonic Lumix DMC-TZ4 Operating Instructions Manual page 289

Enables a rapid succession of photographs to be taken. Succession of photographs taken
while shutter button is held down.
,Set-up: Mode dial _ I_l
SON1SCN2
-, Press 'MENU/SET' -_ Select 'BURST' (P.20)
,Settings
BURST setting . _peed No. of pictures _1
No burst
2.5 pictures/sec.
(DMC-TZ5) [] Fine: Max. 3 (Max.4: DMC-TZ4)
(Burst) 3 pictures/sec. [] Standard: Max. 5 (Max.7: DMC-TZ4)
(DMC-TZ4)
Approx. 2 Until card/built-in memory is full
(Free) pictures/sec _,2
•.1 : When using self-timer: Fixed at 3 pictures
_2 : Becomes progressively slower, (Delayed timing depends on card type, PICTURE SIZE, and
QUALITY.)
@ Focus is fixed from first picture.
@When _ (Burst) is selected, the exposure and white balance are fixed to the settings
for the first picture.
@When I_ is selected, exposure and white balance is adjusted for each picture.
@Burst speed may be reduced if 'SENSITIVITY' is set to high, or if shutter speed is
reduced in darker locations.
@When burst setting is use, flash is prevented from operating, and auto bracket setting is
canceled.
@Settings will be stored even if power is turned off.
@When using BURST while following a moving subject in locations with major differences
in brightness (e.g. indoor to outdoor), exposure stabilization may require a little time,
and optimal exposure may not be achieved.
@Auto review performed regardless of 'AUTO REVIEW' setting.
@Using the 'HI-SPEED BURST' scene mode allows a faster succession of photographs
to be taken (R49).
Automatically adjusts contrast and exposure to give more lifelike colors when there is
significant contrast between background and subject.
• Set-up: Mode dial I_1 -+ Press 'MENU/SET' -+ Select ' I.EXPOSURE' (P.20)
,Settings: _FF /ON (i(]) displayed on screen)
@When set to 'ON', 'SENSITIVITY' of '100' becomes 'AUTO'.
VQT1P79
61