Panasonic Panafax UF-550 User Manual page 175

wiiiiiiiiii
Glossary
DDD
(Direct Distance Dialling)
Deferred polling
Deferred transmission
Department Code
Direct Dialling
Directory Search Dialling
Directory Sheet
DTMF
(Dual Tone Multi-Frequency)
ECM
(Error Correction Mode)
End receiving station
FAX Access code
FAX Forward
FAX Parameter List
File
File Transmission
Fixed print reduction
FUNCTION
G3 mode (Group 3)
A telephone service that allows unassisted dialling, no operator
assistance is required.
The ability to retrieve documents from other stations at a later time.
The ability to send documents to other stations at a later time.
This operation require the user to input a preset 4-digit Department Code
before transmission. The Department Name of selected Department
Code is printed on the Header of each page sent, Cover Sheet, COMM.
Journal and Individual Transmission Journal.
The method of dta_ting where you enter the entire telephone number
through the keypad.
Allows you to dial a full telephone number by seamhing the station's name
entered in the One-Touch keys or Abbreviated dialling numbers.
The list that contains the station names that are programmed into your
unit.
Dialling method that sends a different set of frequencies for each digit of
the telephone keypad. Commonly refers to touch tone Dialling.
The ability to correct transmission errors as detected during the
transmitting phone call.
In a relay network, the final station designated to receive the document.
A 4-digit programmable code that prevents unauthorized operation of your
Fax.
The ability to forward all incoming faxes to the station registered in the
ABBR. No. [00].
The list that contains the home FAX parameters settings that you have
programmed into your machine.
A task that has been stored into the memory of your unit. Examples are
deferred transactions.
A feature that allows you to store a perpetual File (until it is erased) in the
memory that can be sent to a single or multiple stations repeatedly.
The method that allows you to determine one reduction rate, such as 75%,
for all incoming documents.
The control panel key that will be utilized to begin an operation or
configuration of a feature.
Refers to the standards and transmission capabilities of the current
generation of facsimile machines.
I
173