Table of Contents
Advertisement
Auto Program
ACTION
Displays and Exits Menus
Auto Programming
- This feature allows you
to place all channels with a video signal into Channel
Scan Memory. Press the CHANNEL (CH) UP or DOWN
button and only those channels with a signal will be
accessed.
1.
Press the ACTION button to display the Main Menu.
2.
Press the CH DOWN and VOL RIGHT buttons to
select the Set-Up Icon.
3.
Press the ACTION button to display the Set-Up
Menu.
Located On Remote Control
_Selects
Desired
11
_.VO_
_W' I VO_
II _eFeatiur_)is_lhayned
Selects or Adjusts
Features When
Menu is Displayed
MENU
ICON+TEXT
[]
ON MUTE
NO
SET TIME
:
AM
ANTENNA
CABLE
AUTO PROGRAM
NO
MANUAL PROGRAM
NO
[]
MODE
OFF
FIELD 1
LANGUAGE
ENGLISH
ESPA_IOL
i
4.
Press the CH DOWN
button to select "AUTO
PROGRAM".
5.
Press the VOL LEFT or RIGHT button to start Auto
Programming. Channels will automatically advance
until all channels have been scanned.
6.
Press the ACTION button twice after completion of
Auto Programming to exit the Set-Up Menu.
NOTE: Channel numbers with signal present will turn
blue which indicates stored in Channel Scan
Memory.
--tQ--
Advertisement
Table of Contents
