Auto Programming; Manual - Panasonic CT-20S12S Operating Instructions Manual

Auto Program
ACTION
Displays and Exits Menus
Auto Programming
- This fealure allows you
to place all channels with a video signal into Channel
Scan Memory. Press the CHANNEL (CH) UP or DOWN
button and only those channels with a signal will be ac-
cessed.
1. Press the ACTION but:on to display the Main Menu.
2. Press the CH DOWN and VOL RIGHr buttons to
select the Set-Up Icon.
3, Press the ACTION button to display the Set-Up
Menu.
Located On Remote Control
__1_ Selects Desired
II_voLI .-,,'1VOL_ II.,>-- Feature W hen
] _-_._=_ _ __i,_'-_or Adjusts Menu is Displayed
Selects
Features When
Menu is Displayed
MENU ICON+TEXT
[_ ON MUTE NO
SET TIME " AM
ANTENNA CABLE
AUTO PROGRAM NO
MANUAL PROGRAM NO
Io"c'_ MODE OFF FIELD 1
4. Press, the CH DOWN button to select "AUTO PRO-
GRAM".
5. Press the VOL LEFT or RIGHT button to start Auto
Programming. Channels will automatically advance
until all channels have been scarified.
6. Press the ACTION I:,utton twice after completion of
Auto Programming to exit Set-Up Menu.
NOTE: Channel numbe's with signal present will turn
blue which indicates stored in Channel Scan
Memory.
- 20 -