Auto Programming - Panasonic PV-M2044 Operating Instructions Manual

Auto Program
ACTION
Displays and Exits MeL_us
Auto Programming
- This feature allows you
to place all channels with a video signal into Channel
Scan Memory. Press the CHANNEL (CH) UP or DOWN
button and only those channels with a signal will be ac-
cessed.
1. Press the ACTION button to display the Main Menu.
2. Press the CH DOWN and VOL RIGHT buttons to
select the Set-Up Icon.
3. Press the ACTION button to display the Set-Up
Menu.
Located On Remote Control
MEN U ICON+TEXT
ON MUTE NO
SET TIME : AM
ANTENNA CABLE
AUTO PROGRAM NO
MANUAL PROGRAM NO
MODE OFF FIELD 1
5elects or Adjusts
Features When
Menu is Displayed
Selects Desired
Feature When
Menu is Displayed
4. Press the CH DOWN button to select "AUTO PRO-
GRAM".
5. Press the VOL LEFT or RIGHT button to start Auto
Programming. Channels will automatically advance
until all channels have been scanned.
6. Press the ACTION button twice after completion of
Auto Programming to exit Set-Up Menu.
NOTE: Channel numbers with signal present will turn
blue which indicates stored in Channel Scan
Memory.
- 20-