Ice Plus Selection; Dispenser Use Selection; Control Of Freezer Fan Motor; Cooling Fan Motor - LG LMX25964 Series Service Manual

14-1-5 ICE PLUS selection
Please select this function for quick freezing.
• Function is repeat ICE PLUS Icon whenever pressing ICE PLUS button.
• ICE PLUS function automatically turns off after a fixed time passes.
14-1-6 Dispenser use selection
You can select water or ice.
;_ Select water or ice cubes by cycling through the selections when pressing the
DISPENSER button,
;_ Hold your cup in the dispenser for a few seconds after dispensing ice or water to allow the
last pieces of ice or drops of water to fall into the cup.
;_ When after initially establishing the water comes out, the water tank inside fills and until at
the time of quality the hour is caught.
14-1-7 CONTROL OF FREEZER FAN MOTOR
1. Freezer fan motor has high and standard speeds.
2. High speed is used at power-up, for ICE PLUS, and when refrigerator is overloaded.
Standard speeds is used for general purposes.
3. To improve cooling speed, the RPM of the freezer fan motor change from normal speed to high.
4. High speed (2700RPM) : Initial power on or load corresponding operation, ICE PLUS.
Normal speed (2400RPM) : General working conditions.
5. Fan motor stops when refrigerator or freezer door opens.
P_eStcSing[I I
14-1-8 Cooling Fan Motor
1. The cooling fan is switched ON and OFF in conjunction with the compressor.
2. The cooling fan Motor has high and standard speeds. (When room temper rapture more high then 38°C speed is high)
3. The Failure sensing method is the same as in the fan motor of the freezing fan motor(refer to failure diagnosis function
table for failure display).
14-1-9 Ice Compartment Fan
1. The Icing Fan is controlled by the the sensor on the top of the ice compartment.
2. The Failure sensing method is the same as in the fan motor of the freezer
(refer to failure diagnosis function table for failure display)
- 68 -