Using Your Refrigerator; Ensuring Proper Air Circulation; Multi Flow; Ice Plus - LG LFCS25663 series Owner's Manual

ENSURING PROPER AIR CIRCULATION

In order to obtain stable temperature, the air must flow
between the freezer and refrigerator sections. As shown
in the illustration below, the cold air enters through
the bottom part and circulates upward. This air returns
below the freezer floor and the rest of the air enters the
refrigerator section through the top vent.

MULTI FLOW

• The cooling fan operates more powerful and effective
than when in normal operation. This is especially
noticeable when new food is placed in the refrigerator
compartment.
• If the lining is damaged, water or other substances
could enter through the cool air vent causing
decreased efficiency.
B
Do not block any of these vents with packages of food.
This can interrupt the flow of air and cause temperature
and moisture problems.
IMPORTANT: Because air circulates between both
sections, any odors formed in one section will transfer
to the other. You must thoroughly clean both sections to
eliminate odors. To prevent odor transfer and drying out
of food, make sure you wrap or cover foods tightly (See
the "Food Storage Guide" section for details).

ICE PLUS

Press the button ICE PLUS. The LED light will turn on.
This function will remain activated for 24 hours and
intensify the cooling speed of the freezer and increase
ice production.

DOOR ALARM

With this feature you will hear an alarm when the freezer
or refrigerator door is open for more than 1 minute.
These tones will repeat every 30 seconds. The alarm is
cancelled when the door is properly shut. To activate or
deactivate Door Alarm, press the button ALARM.

USING YOUR REFRIGERATOR

CAUTION WHEN CLOSING THE DOOR
To reduce the risk of door scratches, please make
sure that the refrigerator door mullion is always folded

ADJUSTING THE CONTROLS

Your refrigerator has two controls that allow you to
regulate the temperature the freezer and refrigerator
compartments.
Initially set the REFRIGERATOR CONTROL at 37°
degrees F and the FREEZER CONTROL at 0° degrees
F. Leave them at these setting for 24 hours (one day) to
stabilize. Then adjust the compartment temperature as
illustrated above.
• Refrigerator Control: 32 °F to 47 °F (0 °C to 8 °C)
J
To adjust the temperature in the refrigerator compartment
open both doors, then press the REFRIGERATOR button
to cycle through the range of available settings.
• Freezer Control: -6°F to 9 ° F ( - 21°C to -13°C)
To adjust the temperature in the freezer compartment
open both doors, then press the FREEZER button to
cycle through the range of available settings.
• Temperature Display
To change the temperature display from Fahrenheit to
Celsius:
1. Simultaneously press and hold the FREEZER and
2. Do the same to convert back to Fahrenheit.
16
CAUTION
REFRIGERATOR buttons for more than 5 seconds.